Camera Image Signal Circuit Audio Without Navigation

REAR VIEW CAMERA


Camera Image Signal Circuit

1.CHECK CAMERA IMAGE SIGNAL CIRCUIT CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect AV control unit and rear view camera connectors.
3. Check continuity between AV control unit harness connector M93 terminals 35, 36 and rear view camera harness connector T21 terminals 1, 2.






4. Check continuity between AV control unit harness connector M93 terminals 35, 36 and ground.






Is inspection result OK?
YES - GO TO 2
NO - Repair harness or connector.
2.CHECK CAMERA IMAGE SIGNAL
1. Connect AV control unit and rear view camera connectors.
2. Turn ignition switch ON.
3. Shift transmission into reverse.
4. Check signal between AV control unit harness connector M93 terminals 35 and 36.






Is inspection result OK?
YES - Replace AV control unit. Removal And Installation Audio Without Navigation.
NO - Replace rear view camera. Removal and Installation Audio Without Navigation.