Passenger Side

POWER WINDOW MOTOR

PASSENGER SIDE : Diagnosis Procedure


1. CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) INPUT SIGNAL

1.Turn power switch OFF.
2.Disconnect front power window motor (passenger side) connector.
3.Turn power switch ON.
4.Check voltage between front power window motor (passenger side) harness connector and ground.





Is the inspection result normal?
YES- Replace front power window motor (passenger side). Refer to "Removal and Installation" Removal And Installation.
NO- GO TO 2.

2. CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) CIRCUIT

1.Turn power switch OFF.
2.Disconnect front power window switch (passenger side) connector.
3.Check continuity between front power window switch (passenger side) harness connector and front power window motor (passenger side) harness connector.





4.Check continuity between front power window switch (passenger side) harness connector and ground.





Is the inspection result normal?
YES- INSPECTION END
NO- Repair or replace harness.