Front Power Window Switch (Passenger Side)

POWER SUPPLY AND GROUND CIRCUIT

FRONT POWER WINDOW SWITCH (PASSENGER SIDE) : Diagnosis Procedure


1. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) POWER SUPPLY

1.Turn power switch OFF.
2.Disconnect front power window switch (passenger side) connector.
3.Turn power switch ON.
4.Check voltage between front power window switch (passenger side) harness connector and ground.





Is the inspection result normal?
YES- INSPECTION END
NO- GO TO 2.

2. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) POWER SUPPLY CIRCUIT

1.Turn power switch OFF.
2.Disconnect BCM connector.
3.Check continuity between BCM harness connector and front power window switch (passenger side) harness connector.





4.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- Replace BCM. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace harness.