Removal And Installation

12V BATTERY

Removal and Installation


REMOVAL

1.Disconnect the 12V battery cable from the negative terminal. Refer to "Precaution for Removing 12V Battery" Precaution For Removing 12V Battery.

CAUTION:
To prevent damage to the parts, disconnect the 12V battery cable from the negative terminal first.
2.Remove cover of 12V battery positive terminal.
3.Disconnect the 12V battery cable from the positive terminal.
4.Remove battery fix frame mounting nuts and battery fix frame.
5.Remove 12V battery.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
To install the 12V battery, carefully read the following instructions.
- To prevent damage to the parts, connect the 12V battery cable to the positive terminal first.
- After connecting 12V battery cables, to securely supply 12V battery voltage, ensure that they are tightly clamped to 12V battery terminals for good contact.
- To securely supply 12V battery voltage, check 12V battery terminal for poor connection caused by corrosion.
Reset electronic systems as necessary. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Required Procedure After Battery Disconnection" Programming and Relearning.