Charge Status Lamp: Service and Repair

CHARGING STATUS INDICATOR

Removal and Installation


REMOVAL

1.Remove charging status indicator.





1.Apply protective tape (A) on the part to protect it from damage.





2.Insert remover tool (A) between charging status indicator and instrument panel assembly to disengage the pawl and metal clips as shown in the figure.
3.Pull toward the arrow direction.
4.Disconnect harness connector.


CAUTION:
Apply shop cloth or take similar steps at location of tool fulcrum, and take care that no scratches or dents are made.

INSTALLATION

Position clips, and then press each into the instrument panel to fasten clips in place.