Removal And Installation

SIDE OIL SEAL


Removal and Installation


REMOVAL
1. Remove front drive shafts. Front Drive Shaft Left Side (LEFT SIDE) and
Front Drive Shaft Right Side (RIGHT SIDE).





2. Remove differential side oil seals (1) from clutch housing and transaxle case, using an oil seal remover.

CAUTION:
Never damage transaxle case and clutch housing.

INSTALLATION
Note the following, and install in the reverse order of removal.











- Install differential side oil seals (1) to clutch housing and transaxle case, using the drift [Stamping number: B.vi 1666-B] of the drift set
[SST: KV32500QAA ( - )].







CAUTION:
- Never incline differential side oil seal.
- Never damage clutch housing and transaxle case.