With a Sunroof Removal And Installation

HEADLINING


SUNROOF : Removal and Installation


REMOVAL

CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.
1. Remove front pillar garnish (LH and RH). Front Pillar Garnish.




Broken Circle : Clip

2. Disconnect harness connector (A) from headlining and harness clips

3. Remove center pillar upper garnish (LH and RH). Center Pillar Upper Garnish.
4. Remove back door weather-strip. .
5. Remove luggage side upper finisher (LH and RH). Luggage Side Upper Finisher.




Broken Triangle : Pawl

6. Remove all assist grips.
1. Disengage pawl of assist grip clip (1) using a remover tool
(A). Slide assist grip clip forward and remove it.

2. Slide assist grip (2) forward and remove it.
3. Remove metal clips.
7. Remove sun visor assembly (LH and RH).




Broken Triangle : Pawl

1. Disengage sun visor cover fixing pawls with a remover tool
(A), and then remove sun visor cover.

2. Remove sun visor assembly fixing screw, and then remove sun visor assembly.
8. Remove inside mirror and inside mirror cover. Removal And Installation.
9. Remove map lamp assembly. Removal And Installation.
10. Remove sunroof welt.
11. Remove front roof finisher.




Broken Triangle : Pawl

1. Disengage front roof finisher fixing pawls with a remover tool (A).

2. Disconnect harness connector, and then remove front roof finisher.
12. Remove front seat assembly (passenger). Removal and Installation.
13. Remove sun visor holder (LH and RH)





Rotate 90�. Remove toward vehicle lower.
14. Remove headlining clips.





15. Remove headlining assembly through the back door.

CAUTION:
- Two workers are required for removal in order to prevent damage.
- Apply protective tape to the portion where contact may occur during work.
- Never bend headlining when removing.

INSTALLATION
Note the following items, and install in the reverse order of removal.

CAUTION:
- When installing headlining, start by installing both sun visor holders and headlining clips in order to keep the headlining in position.
- Never bend headlining when installing.
- Be careful that the surface is not wrinkled when installing.




Arrow Indicates : Vehicle front

- Align sunroof welt connection (A) to (B) when installing sunroof welt.