Front Fillet Molding

FILLET MOLDING


FRONT FILLET MOLDING : Removal and Installation


REMOVAL
1. Remove front fillet molding fixing clips.




Broken Triangle : Pawl

2. Remove front fillet molding front side fixing pawls.




Broken Circle : Clip

3. Using remover tool (A), disengage the clips from front fillet molding by starting from front side.

CAUTION:
- Apply a protective tape (B) on the body to protect the painted surface from damage.
- Never pull fillet molding strongly.

INSTALLATION
Note the following items, and then install in the reverse order of removal.

CAUTION:
- Always replace fillet molding fixing clips.
- When installing front fillet molding, check that blind clips and pawls are securely fitted in panel holes on body, and then press them in.