Rear

BRAKE TUBE AND HOSE


Rear Brake Tube and Hose


REMOVAL
1. Drain brake fluid. Refer to Removal and Replacement.
2. Remove brake tube from brake hose using a suitable tool.





3. Remove lock plate, and remove brake hose.

INSTALLATION
1. Connect brake hose to brake tube, and temporarily tighten flare nut by hand as much as possible.





2. Secure it to the bracket with the lock plate.
3. Tighten flare nut to the specified torque using a suitable tool. Refer to Diagrams.
4. Bleed the air from the brake hydraulic system. Refer to Service and Repair.