Selector Lever Knob Removal And Installation

SHIFT CONTROL SYSTEM


Selector Lever Knob Removal and Installation


REMOVAL

CAUTION:
Make sure that parking brake is applied before removal and installation.





1. Set selector lever knob (1) in "N" position.
2. Slide knob cover (2) downward.
3. Pull out lock pin (3) from selector lever knob (1).
4. Remove selector lever knob (1) and knob cover (2) as a set from selector lever.

CAUTION:
Do not push selector button.

INSTALLATION
1. Insert lock pin (3) to selector lever knob (1).





2. Install knob cover (2) to selector lever knob (1).
3. Set selector lever in "N" position.
4. Install selector lever knob over selector lever until a click is felt.

CAUTION:
- Do not tilt selector lever knob when installing. Install it straight, and do not tap or apply any shock to install it.
- Do not push selector button.