Diagnosis Procedure 3

NATS(NISSAN ANTI-THEFT SYSTEM)


Diagnosis Procedure 3

Self-diagnostic results:
"ID DISCORD, IMM-ECM" displayed on CONSULT-III screen
1. CONFIRM SELF-DIAGNOSTIC RESULTS
Confirm SELF-DIAGNOSTIC RESULTS "ID DISCORD, IMM-ECM" displayed on CONSULT-III screen.

NOTE:
"ID DISCORD IMM-ECM":
Registered ID of BCM is in discord with that of ECM.
Is CONSULT-III screen displayed as shown above [P1611]?
YES >> GO TO 2.
NO >> GO TO Trouble Diagnosis.
2. PERFORM INITIALIZATION WITH CONSULT-III
Perform initialization with CONSULT-III. Re-register all NATS ignition key IDs.
For initialization, refer to "CONSULT-III Operation Manual".

NOTE:
If the initialization is not completed or malfunctions, CONSULT-III shows message on the screen [INITIALIZATION FAIL].
Can the system be initialized?
YES >>
- Start engine. (END)
- (System initialization had not been completed.)
NO >> ECM is malfunctioning.
- Replace ECM.
- Perform initialization with CONSULT-III
For initialization, refer to "CONSULT-III Operation Manual"