Check at Idle
Check at Idle1.CHECK STARTING THE ENGINE
1. Park vehicle on flat surface.
2. Move selector lever to "P" or "N" position.
3. Turn ignition switch OFF.
4. Turn ignition switch START.
Is engine started?
YES >> GO TO 2.
NO >> Stop "Road Test". Mark the box on the CVT-155, "Engine Cannot Be Started in "P" or "N" Position" on the CVT-28, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Go to CVT-155, "Engine Cannot Be Started in "P" or "N" Position". Engine Cannot Be Started In "P", or "N" Position
2.CHECK STARTING THE ENGINE
1. Turn ignition switch ON.
2. Move selector lever to "R", "D" or "L" position.
3. Turn ignition switch START.
Is engine started?
YES >> Stop "Road Test". Mark the box on the CVT-155, "Engine Cannot Be Started in "P" or "N" Position" on the CVT-28, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Go to CVT-155, "Engine Cannot Be Started in "P" or "N" Position". Engine Cannot Be Started In "P", or "N" Position
NO >> GO TO 3.
3.CHECK "P" POSITION FUNCTION
1. Move selector lever to "P" position.
2. Turn ignition switch OFF.
3. Release parking brake.
4. Push vehicle forward or backward.
5. Apply parking brake.
Does vehicle move when it is pushed forward or backward?
YES >> Mark the box CVT-155, "In "P" Position, Vehicle Moves Forward or Backward When Pushed" on the CVT-28, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".
NO >> GO TO 4.
4.CHECK "N" POSITION FUNCTION
1. Start engine.
2. Move selector lever to "N" position.
3. Release parking brake.
Does vehicle move forward or backward?
YES >> Mark the box CVT-156, "In "N" Position, Vehicle Moves" on the CVT-28, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".
NO >> GO TO 5.
5.CHECK SHIFT SHOCK
1. Apply foot brake.
2. Move selector lever to "R" position.
Is there large shock when changing from "N" to "R" position?
YES >> Mark the box CVT-156, large Shock "N" ---> "R" Position" on the CVT-28, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".
NO >> GO TO 6.
6.CHECK "R" POSITION FUNCTION
Release foot brake for several seconds.
Does vehicle creep backward when foot brake is released?
YES >> GO TO 7.
NO >> Mark the box CVT-157, "Vehicle Does Not Creep Backward in "R" Position" on the CVT-28, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Continue "Road Test".
7.CHECK "D", "L" POSITIONS FUNCTION
Move selector lever to "D" and "L" positions and check if vehicle creeps forward.
Does vehicle creep forward in all positions?
YES >> Go to CVT-41, "Cruise Test". Cruise Test
NO >> Stop "Road Test". Mark the box CVT-158, "Vehicle Does Not Creep Forward in "D" or "L" Position" on the CVT-28, "How to Perform Trouble Diagnosis for Quick and Accurate Repair". Go to CVT-158, "Vehicle Does Not Creep Forward in "D" or "L" Position". Vehicle Does Not Creep Forward In "D" or "L" Position