Diagnostic Procedure 2

Trouble Diagnosis with CONSULT-III

DIAGNOSTIC PROCEDURE 2
Diagnostic code is displayed on "SELF-DIAG [CURRENT]".
If no malfunction is detected on "SELF-DIAG [CURRENT]", but malfunction is detected in "SRS Operation Check" the following cases may exist:
- "SELF-DIAG [PAST]" memory might not be erased.
- "The SRS system malfunctions intermittently.

Refer to "DIAGNOSTIC PROCEDURE 4"

CONSULT-III Diagnostic Code Chart















NOTE: Follow the procedures in numerical order when performing repairs. Confirm whether the repair has been successful using air bag warning lamp or CONSULT-III after each repair. If malfunction is still observed proceed to the next step. When malfunction has been eliminated further repair work is not required.