Drive Belt: Testing and Inspection

Checking Drive Belts

WARNING:
Be sure to perform this step when the engine is stopped.

^ Make sure that the indicator (notch on fixed side) of drive belt auto-tensioner is within the possible use range (A).

NOTE:
^ Check the drive belt auto-tensioner indication when the engine is cold.
^ When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B).

^ Visually check entire drive belt for wear, damage or cracks.
^ If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.