In N Position, Vehicle Moves

In N Position, Vehicle Moves

SYMPTOM: Vehicle moves forward or backward when selecting N position.

DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis check. Refer to CVT-54, "SELF-DIAGNOSTIC RESULT MODE". With Manufacturer's Scan Tool
Do the self-diagnostic results indicate PNP switch circuit?
YES >> Check PNP switch circuit. Refer to CVT-66, "DTC P0705 PARK/NEUTRAL POSITION SWITCH". P0705
NO >> GO TO 2.

2. CHECK CVT POSITION
Check CVT position. Refer to CVT-190, "Checking of CVT Position". Testing and Inspection
OK or NG
OK >> GO TO 3.
NG >> Adjust CVT position.

3. CHECK CVT FLUID LEVEL
Check CVT fluid level.
OK or NG
OK >> GO TO 4.
NG >> Refill CVT fluid.

4. CHECK SYMPTOM
Check again. Refer to CVT-43, "Check at Idle". Check at Idle
OK or NG
OK >> INSPECTION END
NG >> GO TO 5.

5. CHECK TCM
1. Check TCM input/output signals. Refer to CVT-49, "TCM Input/Output Signal Reference Values". Pinout Values and Diagnostic Parameters
2. If NG, re-check TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK >> Replace the transaxle assembly.
NG >> Repair or replace damaged parts.