FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Collision Diagnosis

FOR FRONTAL COLLISION
To repair the SRS for a frontal collision, perform the following steps.

When SRS (except the side air bag) is activated in a collision
1. Replace the diagnosis sensor unit.
2. Remove the air bag modules (except the side air bag module).
3. Check the SRS components using the table shown below:
- Replace any SRS components showing visible signs of damage (dents, cracks, deformation).
4. Install new air bag modules (except the side air bag module).
5. Conduct self-diagnosis using CONSULT or "AIR BAG" warning lamp. Ensure entire SRS operates properly. Clearing Trouble Codes

When SRS is not activated in a collision
1. Check the SRS components using the table shown below:
- Replace any SRS components showing visible signs of damage (dents, cracks, deformation).
2. Conduct self-diagnosis using CONSULT or "AIR BAG" warning lamp. Ensure entire SRS operates properly. Clearing Trouble Codes

SRS Inspection (part 1 Of 2):




SRS Inspection (Part 2 Of 2):




SRS Inspection

FOR SIDE COLLISION

To repair the SRS for a side collision, perform the following steps.

When the side air bag is activated in the side collision
1. Replace the following component:
- Diagnosis sensor unit
- Satellite sensor (on the side on which side air bag is activated)
2. Remove the deployed side air bag module.
3. Check the SRS components and the related parts using the table shown.
- Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
4. Install new side air bag module (on the side on which side air bag has been activated) with new nuts.
5. Conduct self-diagnosis using CONSULT or "AIR BAG" warning lamp. Ensure entire SRS operates properly.

When SRS is not activated in the side collision
1. Check the SRS components and the related parts using the table shown below.
- Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
2. Conduct self-diagnosis using CONSULT or "AIR BAG" warning lamp. Ensure entire SRS operates properly. Clearing Trouble Codes

In The Case Of The Side Collision:




In The Case Of The Side Collision