P0299

DTC P0299 SUPERCHARGER FUNCTION

On Board Diagnosis Logic:

DTC Confirmation Procedure

WITH CONSULT-II

NOTE: If "DTC Confirmation Procedure" has been previously conducted, always turn ignition switch "OFF" and wait at least 5 seconds before conducting the next test.




1. Turn ignition switch "ON" and select "DATA MONITOR" mode with CONSULT-II.
2. Start engine.




3. Maintain the given conditions for at least 5 seconds.
4. If 1st trip DTC is detected, go to "Diagnostic Procedure" below.

WITH GST
Follow the procedure "WITH CONSULT-II" above.

Diagnostic Procedure

Diagnostic Procedure Step 1 - 2:

Diagnostic Procedure Step 3 - 4: