Front Door and Rear Door Trim

Component Location:

Component Views:

Door trim (Formed type)
Remove manual window regulator handle, if equipped.
1. Remove inside handle escutcheon.A
2. Remove door armrest.B
3. Remove screw securing door pull handle.
4. Remove power window switch, then disconnect the connector. C D
5. Remove two screws.
6. Remove clips securing door finisher.
7. Lift out door finisher.
8. Remove inside escutcheon.
9. Remove screw securing door pull handle.
10. Remove clips securing door finisher.
11. Lift out door finisher.