Inspection Procedure 8

INSPECTION PROCEDURE 8: Oil Leakage [DIFFERENTIAL]

DIAGNOSIS

STEP 1. Check the cover installation.

Q. Is the cover installed correctly?

YES Go to Step 2.
NO Repair. Then go to Step 4.
STEP 2. Check the oil seal for wear or damage.

Q. Is the oil seal worn or damaged?

YES Replace the seal. Then go to Step 4.
NO Go to Step 3.
STEP 3. Check the oil level.





Remove the filler plug and check the gear oil level.

Q. Is the gear oil level more than 6 mm (0.2 inch) below the bottom of the filler plug hole?

YES Refill the specified lubricant.
Differential mechanism part: MITSUBISHI Genuine DIA QUEEN LSD gear oil
Torque transfer mechanism part: DIAMOND ATF SP III
Then go to Step 4 .

NO Go to Step 4.

STEP 4. Retest the system.

Q. Is there oil leakage?

YES Start over at Step 1.
NO The procedure is complete.