Inspection Procedure 9

INSPECTION PROCEDURE 9: The vehicle does not creep with the D-range/R-range/manual mode.

COMMENTS ON TROUBLE SYMPTOM

The foot brake or parking brake may be dragging. Mechatronic assembly, clutch assembly, or transaxle assembly may have a problem.
NOTE:
If the fluid temperature is extremely high, the creep is controlled slightly for slip control.

PROBABLE CAUSES

- Drag of foot brake or parking brake
- Malfunction of the mechatronic assembly
- Malfunction of the clutch assembly
- Malfunction of the transaxle assembly

DIAGNOSTIC PROCEDURE

STEP 1. Inspect the foot brake or parking brake.

Check that the foot brake or parking brake is not dragging.

Q. Is the check result normal?

YES Go to Step 2.
NO Adjust the foot brake or parking brake.
STEP 2. Retest the system.

Q. Does a malfunction take place again?

YES Replace the transaxle assembly. (Refer to Removal and Replacement.)
NO Intermittent malfunction. How to Cope With Intermittent Malfunctions.)