Inspection Procedure 15

INSPECTION PROCEDURE 15: The engine stops when the lever is shifted from "N" to "D" or "N" to "R".

COMMENTS ON TROUBLE SYMPTOM

Engine system, mechatronic assembly, or clutch assembly may have a problem.

PROBABLE CAUSES

- Malfunction of the engine system
- Malfunction of the mechatronic assembly
- Malfunction of the clutch assembly

DIAGNOSTIC PROCEDURE

STEP 1. Check the engine system

Q. Is the check result normal?

YES Replace the transaxle assembly. (Refer to Removal and Replacement.)
NO Intermittent malfunction. How to Cope With Intermittent Malfunctions.)