Inspection Procedure 13

INSPECTION PROCEDURE 13: The shift shock is large.

COMMENTS ON TROUBLE SYMPTOM

The mechatronic assembly, clutch assembly, or transaxle assembly may have a problem.

PROBABLE CAUSES

- Malfunction of the mechatronic assembly
- Malfunction of the clutch assembly
- Malfunction of the transaxle assembly

DIAGNOSTIC PROCEDURE

STEP 1. Retest the system.

Q. Does a malfunction take place again?

YES Replace the transaxle assembly. (Refer to Removal and Replacement.)
NO Intermittent malfunction. How to Cope With Intermittent Malfunctions.)