Inspection Procedure 11

INSPECTION PROCEDURE 11: Poor acceleration

COMMENTS ON TROUBLE SYMPTOM

Fluid may be insufficient or contaminated. Engine system, mechatronic assembly, clutch assembly, or transaxle assembly may have a problem.

PROBABLE CAUSES

- Malfunction of the engine system
- Insufficient or contaminated fluid
- Malfunction of the mechatronic assembly
- Malfunction of the clutch assembly
- Malfunction of the transaxle assembly

DIAGNOSTIC PROCEDURE

STEP 1. Check the engine system

Q. Is the check result normal?

YES Go to Step 2
NO Repair the engine system.
STEP 2. Fluid check

Check for the fluid level and if no foreign material and contamination are found.

Q. Is the check result normal?

YES Go to Step 3.
NO Charge or replace the fluid.
STEP 3. Retest the system.

Q. Does a malfunction take place again?

YES Replace the transaxle assembly. (Refer to Removal and Replacement.)
NO Intermittent malfunction. How to Cope With Intermittent Malfunctions.)