Inspection Procedure 10

INSPECTION PROCEDURE 10: The shock is large when the vehicle is stopped and the brake pedal is released with the D-range/R-range/manual mode.

COMMENTS ON TROUBLE SYMPTOM

The mechatronic assembly, or clutch assembly may have a problem.

PROBABLE CAUSES

- Malfunction of the mechatronic assembly
- Malfunction of the clutch assembly

DIAGNOSTIC PROCEDURE

STEP 1. Retest the system.

Q. Does a malfunction take place again?

YES Replace the transaxle assembly. (Refer to Removal and Replacement.)
NO Intermittent malfunction. How to Cope With Intermittent Malfunctions.)