Wheel Speed Sensor: Service and Repair

REMOVAL AND INSTALLATION

CAUTION:
The vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to reassembling it.









NOTE:
The vehicle speed detection encoder is integrated with the front wheel bearing and the rear hub assembly, which cannot be disassembled.

INSTALLATION SERVICE POINTS

]]A[[ FRONT WHEEL SPEED SENSOR GROMMET/REAR WHEEL SPEED SENSOR GROMMET INSTALLATION





Install the front wheel speed sensor grommet and the rear wheel speed sensor grommet to the body panel snugly as shown in the figure.

]]B[[ SENSOR HARNESS CLIP INSTALLATION





As shown in the figure, align the edge of front wheel speed sensor marking with the edge of sensor wiring harness clip, then perform the installation.

]]C[[ FRONT WHEEL SPEED SENSOR CONNECTOR INSTALLATION





As shown in the figure, align the edge of front wheel speed sensor marking with the edge of clip, then perform the installation.