Brake Pad Check

BRAKE PAD CHECK









1.
CAUTION:
If there is a significant difference in the thicknesses of the pads on the left and right sides, check moving parts (Refer to Brake Disc Check).

Visually check the thickness of brake pad from the inspection hole of the caliper body.
Standard value:

9.85 mm (0.39 inch)[ Front]
9.0 mm (0.35 inch)[ Rear]
Limit: 2.0 mm (0.08 inch)
2. When the thickness is lower than the limit value, replace both brake pads (right and left) as a set (Refer to Brake Pad Replacement).