Inspection Procedure 1

INSPECTION PROCEDURE 1: Difficult Locking and Unlocking

DIAGNOSIS
STEP 1. Check that the release cable is routed correctly.

Q. Is the release cable routed correctly?

YES Go to Step 2.

NO Re-route the release cable. Then go to Step 4.

STEP 2. Check the engagement of the hood latch and hood striker.

Q. Are the hood latch and hood striker engaged correctly?

YES Go to Step 3.

NO Adjust the hood latch (Refer to Adjustments). Then go to Step 4.

STEP 3. Check for proper lubrication of release cable.

Q. Is the release cable properly lubricated?

YES Go to Step 4.

NO Lubricate, then go to Step 4.

STEP 4. Retest the system.

Q. Does the hood lock operate normally?

YES The procedure is complete.

NO Return to Step 1.