Inspection Procedure 2

INSPECTION PROCEDURE 2: Door Window Glass Malfunction

DIAGNOSIS
STEP 1. Check the door window glass installation condition.

Q. Is the door window glass installed correctly?

YES Go to Step 2.

NO Assemble the door window glass again. (Refer to Service and Repair.) Then go to Step 4.

STEP 2. Check the door sash.

Q. Is the door sash in good condition?

YES Go to Step 3.

NO Repair or replace the door sash, then go to Step 4.

STEP 3. Inspect the window regulator assembly.

Q. Is the window regulator assembly in good condition?

YES Go to Step 4.

NO Repair or replace the window regulator assembly, then go to Step 4.

STEP 4. Retest the system.

Q. Does the door window glass operate correctly?

YES The procedure is complete.

NO Return to Step 1.