Throttle Body Cleaning

THROTTLE BODY (THROTTLE VALVE AREA) CLEANING

WARNING:
When touching the throttle valve, surely shut off the driving circuits of the throttle valve. In the event that the throttle valve is operated, a finger might be injured as the result of being caught by the throttle valve.

CAUTION:

- When the throttle body cleaning is performed, use scan tool MB991958 to initialize the learning value Initialization Procedure for Learning Value in MFI Engine ).

- Do not spray the cleaning solvent directly to the throttle valve.

- Make sure the cleaning solvent does not enter the motor and the sensor through the shaft.

1. Disconnect the electronic-controlled throttle valve connector.

2. Remove the throttle body.

3. Spray cleaning solvent on a clean cloth.

4. Wipe off the dirt around the throttle valve with the cloth sprayed with cleaning solvent.

5. Attach the air intake hose.

6. Connect the electronic-controlled throttle valve connector.