Inspection Procedure 3

INSPECTION PROCEDURE 3: Selector Lever can be Moved from "P" to "R" Position with Brake Pedal Depressed when Ignition Key is at "LOCK" (OFF) Position.

TECHNICAL DESCRIPTION (COMMENT)

Key interlock cable or lock cam may be defective.

TROUBLESHOOTING HINTS

- Malfunction of lock cam
- Malfunction of key interlock cable

DIAGNOSIS

STEP 1. Check the connection of lock cam and key interlock cable.

Q. Is the connection of lock cam and key interlock cable in good condition?

YES Go to Step 2.

NO Repair the connection of lock cam. When the brake pedal is depressed with the ignition key at the "LOCK" (OFF) position, check that the selector lever can not be moved from "P" position to "R" position.

STEP 2. Check the fit of the lock cam.

Q. Is the lock cam installed correctly?

YES Go to Step 3.

NO Install the lock cam correctly. When the brake pedal is depressed with the ignition key at the "LOCK" (OFF) position, check that the selector lever can not be moved from "P" position to "R" position.

STEP 3. Check the lock cam.

Q. Is the lock cam in good condition?

YES Go to Step 4.

NO Replace the selector lever assembly. Refer to Service and Repair.
When the brake pedal is depressed with the ignition key at the "LOCK" (OFF) position, check that the selector lever can not be moved from "P" position to "R" position.

STEP 4. Check the fit of the key interlock cable.

Q. Is the key interlock cable installed correctly?

YES Go to Step 5.

NO Install the key interlock cable correctly. Refer to Service and Repair.
When the brake pedal is depressed with the ignition key at the "LOCK" (OFF) position, check that the selector lever can not be moved from "P" position to "R" position.

STEP 5. Check the key interlock cable.

Q. Is the key interlock cable in good condition?

YES No action to be taken.

NO Replace the key interlock cable. Refer to Service and Repair.
When the brake pedal is depressed with the ignition key at the "LOCK" (OFF) position, check that the selector lever can not be moved from "P" position to "R" position.