Inspection Procedure 2

INSPECTION PROCEDURE 2: Door Window Glass Malfunction

DIAGNOSIS
STEP 1. Check the door window glass installation condition.

Q. Is the door window installed correctly?

YES Go to Step 2.

NO Reinstall the door window glass (Refer to Service and Repair). Then go to Step 4.

STEP 2. Check the delta window glass.

Q. Is the delta window glass in good condition?

YES Go to Step 3.

NO Repair or replace delta window glass, then go to Step 4.

STEP 3. Inspect the window regulator assembly.

Q. Is the window regulator assembly in good condition?

YES Go to Step 4.

NO Repair or replace the window regulator assembly, then go to Step 4.

STEP 4. Retest the system.

Q. Does the door window operate correctly?

YES The procedure is complete.

NO Return to Step 1.