Inspection Procedure 15: The Engine Stops When The Lever Is Shifted From "N" to "D" or "N" to "R"

INSPECTION PROCEDURE 15: The engine stops when the lever is shifted from "N" to "D" or "N" to "R".

COMMENTS ON TROUBLE SYMPTOM
Engine system, mechatronic assembly, or clutch assembly may have a problem.

PROBABLE CAUSES
^ Malfunction of the engine system
^ Malfunction of the mechatronic assembly
^ Malfunction of the clutch assembly

DIAGNOSTIC PROCEDURE

STEP 1. Check the engine system
Q: Is the check result normal?
YES: Go to Step 2
NO: Repair the engine system.

STEP 2. Retest the system.
Q: Does a malfunction take place again?
YES: Replace the mechatronic assembly. Then go to Step 3.
NO: Intermittent malfunction.

STEP 3. Retest the system.
Q: Does a malfunction take place again?
YES: Replace the clutch assembly.
NO: Intermittent malfunction.