Inspection Procedure 10: The Shock Is Large When The Vehicle Is Stopped and The Brake Pedal Is Released With The D-Range/R-Rang

INSPECTION PROCEDURE 10: The shock is large when the vehicle is stopped and the brake pedal is released with the D-range/R-range/manual mode.

COMMENTS ON TROUBLE SYMPTOM
The mechatronic assembly, or clutch assembly may have a problem.

PROBABLE CAUSES
^ Malfunction of the mechatronic assembly
^ Malfunction of the clutch assembly

DIAGNOSTIC PROCEDURE

STEP 1. Retest the system.
Q: Does a malfunction take place again?
YES: Replace the mechatronic assembly. Then go to Step 2.
NO: Intermittent malfunction.

STEP 2. Retest the system.
Q: Does a malfunction take place again?
YES: Replace the clutch assembly.
NO: Intermittent malfunction.