Inspection Procedure 3: Rattling Noise
INSPECTION PROCEDURE 3: Rattling NoiseDIAGNOSIS
STEP 1. Check for proper oil pump and steering gear installation.
Q: Is the oil pump and the steering gear installation correct?
YES: Go to Step 2.
NO: Repair it. Then go to Step 4.
STEP 2. Check for interference of other parts with the steering column and the power steering hoses.
Q: Is there interference?
YES: Correct the interference. Then go to Step 4.
NO: Go to Step 3.
STEP 3. Check for noise from inside the oil pump or the steering gear.
Q: Is there noise?
YES: Replace the part. Then go to Step 4.
NO: Go to Step 4.
STEP 4. Check for rattling noise.
Confirm that no noise is generated.
Q: Is there noise?
YES: Repeat from Step 1.
NO: The procedure is complete.