Inspection Procedure 6: Squealing, Groaning or Chattering Noise When Brakes Are Applied

INSPECTION PROCEDURE 6: Squealing, Groaning or Chattering Noise when Brakes are Applied

DIAGNOSIS

STEP 1. Check the brake disk and pads for wear or cutting.

Q: Is there wear or cutting?
YES: Repair or replace the part. Then go to Step 4.
NO: Go to Step 2.

STEP 2. Check the calipers for rust.

Q: Is there any rust?
YES: Remove the rust. Then go to Step 4.
NO: Go to Step 3.

STEP 3. Adjust the brake pedal.

Q: Is the brake pedal adjusted correctly?
YES: Go to Step 4.
NO: Adjust the brake pedal. Then go to Step 4.

STEP 4. Recheck symptom.

Q: Is the symptom eliminated?
YES: The procedure is complete.
NO: Start over at step 1. If a new symptom surfaces, refer to the symptom chart. Symptom Chart