Inspection Procedure 3
When the Selector Lever is Moved to "N" Range, Auto-cruise Control is not Cancelled .COMMENT
The transmission range switch circuit is suspected.
TROUBLESHOOTING HINTS
(The most likely causes for this case:)
- Malfunction of the transmission range switch.
- Damaged harness or connector.
- Malfunction of the PCM.
DIAGNOSIS
Refer to, Diagnostic Trouble Code Procedures-DTC 27: Transmission Range Switch System (Open Circuit) , DTC 28: Transmission Range Switch System (Short Circuit) in Transmission Control System/Testing and Inspection/Procedures/Trouble code diagnostic Charts.