Inspection Procedure 2

INSPECTION PROCEDURE 2: Poor Ride

DIAGNOSIS

STEP 1. Check the excessive tire inflation pressure.
Q: Is the tire inflation pressure in good condition?
YES: Go to Step 2
NO: Adjust the pressure, then go to Step 4

STEP 2. Check for malfunction of shock absorbers (weak or broken springs).
Q: Are the shock absorbers in good condition?
YES: Go to Step 3
NO: Replace the faulty part, then go to Step 4

STEP 3. Check the stabilizer bar and/or stabilizer bar links for deformity or damage.
Q: Are the stabilizer bar and/or stabilizer bar link deformed or damaged?
YES: Replace the faulty part, then go to Step 4
NO: Go to Step 4

STEP 4. Retest the system.
Q: Is the malfunction eliminated?
YES: The procedure is complete
NO: Return to Step 1