Inspection Procedure 8

Wind Noise Around Door

DIAGNOSIS

STEP 1. Check the weatherstrip for holding condition.

Q: Is the weatherstrip holding firmly?

YES: Go to Step 2.

NO: Adjust fit of door. Then go to Step 5.

STEP 2. Check the weatherstrip for installation condition.

Q: Is the weatherstrip for installed properly?

YES: Go to Step 3.

NO: Repair or replace the weatherstrip. Then go to Step 5.

STEP 3. Check the clearance.

Q: Are the door glass and the door weatherstrip holder assembled correctly?

YES: Go to Step 4.

NO: Adjust the door glass and the door weatherstrip. Then go to Step 5.

STEP 4. Check the door.

Q: Is the door deformed?

YES: Replace the door, then go to Step 5.

NO: Go to Step 5.

STEP 5. Retest the system.

Q: Has the wind noise been improved?

YES: Return to Step 1.

NO: This diagnosis complete.