Inspection Procedure 5

CD Auto Changer does Not Operate.

TECHNICAL DESCRIPTION (COMMENT)
The CD auto changer is connected via only the DIN cable to the radio and CD player. Therefore, if the DIN cable is defective, the audio system does not operate normally.

TROUBLESHOOTING HINTS
- Damaged DIN cable.
- Malfunction of the CD auto changer.
- Malfunction of the radio and CD player.

DIAGNOSIS

If the DIN cable between CD auto changer and radio and CD player is damaged, repair or replace it. The CD auto changer should operate normally.

If the DIN cable is in good condition, repair or replace the CD auto changer or radio and CD player. The CD auto changer should operate normally.