Inspection Procedure 4

INSPECTION PROCEDURE 4: Clutch Pedal Feels "Heavy"

DIAGNOSIS

Step 1. Check the clutch pedal clevis pin for insufficient lubrication.
Q: Is the lubrication of the clutch pedal clevis pin sufficient?
YES: Go to Step 2.
NO: Repair the clutch pedal. Then go to Step 4.

Step 2. Check the clutch disc spline for insufficient lubrication.
Q: Is the lubrication of the clutch disc spline sufficient?
YES: Go to Step 3.
NO: Replace the clutch disc. Then go to Step 4.

Step 3. Check the insufficient lubrication of bearing sleeve sliding surface.
Q: Is the lubrication of the bearing sleeve sliding surface sufficient?
YES: Go to Step 4.
NO: Repair the bearing sleeve sliding surface. Then go to Step 4.

Step 4. Check the symptom.
Q: Is the symptom reproduced?
YES: Return to Step 1.
NO: This diagnosis is complete.