DTC 95

Right Hand Side Impact Sensor System for Fault 1

DTC SET CONDITIONS
This DTC is output if the following are detected from the analog G-sensor output.
- Analog G-sensor is not operating.
- Analog G-sensor characteristics are abnormal.
- Analog G-sensor output is abnormal.

TROUBLESHOOTING HINTS
Malfunction of side impact sensor (for DTC 92) and side impact sensor (for DTC 95)

DIAGNOSIS
Replace side impact sensor (for DTC 92) and side impact sensor (for DTC 95).

Q: Is any of DTC 92 or 95 output?

YES: Replace the SRS-ECU.

NO: This diagnosis is complete. (If no malfunctions are not found in all steps, an intermittent malfunction is suspected. Refer to How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction.)