5. Blower Fan and Motor Does Not Stop Turning

DIAGNOSIS




STEP 1. Check the harness wire between the blower fan and motor connector C-17, the resistor connector C-16, and the blower switch connector C-48.
If any harness wire between the blower fan and motor connector C-17, the resistor connector C-16, and the blower switch connector C-48 is damaged, repair it. Then go to Step-4.
If harness wire is normal, go to Step 2.







STEP 2. Check the blower relay continuity.
If incorrect, replace. Then go to Step 4.
If correct, go to Step 3.







STEP 3. Check the blower switch continuity.
If incorrect, replace. Then go to Step 4.

STEP 4. Check symptoms.
Check that the blower motor stops turning.