Valve Body

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

DISASSEMBLY AND REASSEMBLY
REASSEMBLY SERVICE POINTS
>A< STOPPER PLATE/N-D PLATE/TEFLON BALL/STEEL BALL LOCATION





1. Install the stopper plates, N-D plate, teflon ball, and steel balls into the upper valve body as shown.

>B< UPPER VALVE BODY SUB ASSEMBLY INSTALLATION





1. Install the special tool and secure the upper separating plate and intermediate plate with eight mounting bolts. Then, remove the special tool.

>C< OIL FILTER/STEEL BALL/RELIEF SPRING INSTALLATION





1. Install the oil filter, two steel balls, and spring to the intermediate plate.

>D< LOWER VALVE BODY SUB ASSEMBLY INSTALLATION





1. Mount the special tool to the intermediate plate.





2. Install the separating plate.





3. Secure the lower valve body with mounting bolts and then remove the special tool.

>E< SOLENOID VALVE ASSEMBLY INSTALLATION








1. Install the solenoid valves as shown.