Removing and Installing/Replacing Lock for Left or Right Rear Seat Backrest

52 26 311 - Removing and installing/replacing lock for left or right rear seat backrest





Necessary preliminary tasks:
- Remove backrest cover Removing and Installing/Replacing Backrest Cover for Left or Right Rear Seat





R55, R56 Series only:
Release screws (1).
Tightening torque 52 26 01AZ [1][2]Seats.





Unclip Bowden cable (1) and feed out from lock.





R57 Series only:
Release screws (1).
Tightening torque 52 26 01AZ [1][2]Seats.
Pull release unit (2) out of rear seat back.
Remove counter-support (3).





Installation:
Make sure release unit is correctly seated in counter-support.