Removing and Installing/Replacing Rear Panel on Left or Right Front Seat Backrest (Normal/Manual)

52 13 198 - Removing and installing/replacing rear panel on left or right front seat backrest (normal/manual)





Raise release handle and release screw (1).
Tightening torque: 52 13 05AZ.
Detach release handle.
Release screws (2).
Tightening torque: 52 13 07AZ.





Retaining hook in marked area must be levered out from backrest frame without incurring damage.
Reach between rear panel and backrest cover.
Pull rear panel upwards and at same time lever out of backrest frame.