Removing and Installing/Replacing Rear Left or Right Side Trim Panel

51 43 002 - Removing and installing/replacing rear left or right side trim





Necessary preliminary tasks:
- Remove rear seat Rear Seat, Through-Loading
- Remove backrest for rear seat
- Open convertible top





Unclip clip (1).
Detach mucket (2) in direction of arrow from side trim (4).
Release screw (3).





Release seat belt screw (1) on entrance cover strip (2).

Installation:
Tightening torque 72 11 4AZ.





Lever out expansion rivets (1).
Release screw (2).
Unclip clips (3) and remove side trim (4) inwards and upwards.





Installation:
Guides (1) on side trim (3) must not be damaged.

Replacement:

If necessary, replace faulty clips (2) on side trim (3).