61 62 062 Removing and Installing/Replacing Left Rear Window Wiper Motor

61 62 062 - Removing and installing/replacing left rear window wiper motor





Necessary preliminary tasks:
- Remove wiper arm for rear window wiper 61 62 032 Removing and Installing/Replacing Wiper Arm on Rear Window (Left)
- Remove trim panel on splitdoor





Disconnect plug connection (1).
Release wiring harnesses from attachment points (3).
Release screws (2). Tightening torque 61 21 2AZ 61 62 Rear Wiper.
Detach rear window wiper motor (4) from grommet in splitdoor.

Installation:
- Check grommet of wiper shaft for signs of damage, replace if necessary
- Make sure grommet and spacer sleeves (5) are correctly seated on splitdoor and on rear window wiper motor (4) respectively