Adjusting Spray Nozzle for Rear Window Washer Unit

61 62 100 - Adjusting spray nozzle for rear window washer unit





Note:
Rear window wipers must be in rest position.

Mark contact points (1) with adhesive tape (A=42 mm / B=100 mm).

Actuate rear window washer unit.
Jet sprays must strike markings.
If necessary, adjust spray nozzle (2).

Important!
Do not insert any pointed objects into spray nozzle (2) (risk of damage).

Adjust spray nozzle (2) with a suitable tool until jet sprays strike markings.

If necessary, remove adhesive residue from rear windows.
Fill up with washer fluid.