65 77 725 Removing and Installing/Replacing Right B-Pillar Sensor

65 77 725 - Removing and installing/replacing right B-pillar sensor





Warning!
Comply with airbag safety regulations [1][2][3]Safety Precautions and General Information.
Incorrect handling can activate airbag and cause injury.





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove front seat belt reel 72 11 092 Removing and Installing/Replacing Rear Left or Right Seat Belts





Release screw (1).
Release screw (2) and feed out sensor.
Tightening torque 65 77 3AZ 65 77 Airbag Control Unit and Airbag Sensors.
Disconnect associated plug connection.

Installation Note:
Retaining lug (3) must not be damaged.
Make sure sensor is securely seated.