Removing and Installing/Replacing Push Rod (Stabilizer Link) for Left/Right Stabilizer

31 35 005 - Removing and installing/replacing push rod (stabilizer link) for left/right stabilizer





Necessary preliminary tasks:
- Remove wheel Removing or Installing Front or Rear Wheel.





Release nut (1), gripping with Allen key or open-end wrench.

Installation Note:
Replace self-locking nut.
Tightening torque 31 35 1AZ Front Axle - Stabilizer Bar.





Cars up to 03/02
Release nut (2), gripping with Allen key or open-end wrench (1).

Installation:
Replace self-locking nut.
Tightening torque 31 35 2AZ Front Axle - Stabilizer Bar.





Cars from 03/02
Release nut (1), gripping with Allen key or open-end wrench.

Installation:
Replace self-locking nut.
Tightening torque 31 35 2AZ Front Axle - Stabilizer Bar.